I. Main features
1. These MT series good quality decoilers are very common decoiling equipments for metal sheet stamping industry.
2. They can suit for various metal sheet coil material, such as cold rolled steel, hot rolled steel, galvanized steel etc.
3. Each decoiler adopts a high quality design, with strong cantilever mandrel and base structure, to load a heavy metal sheet coil.
4. It adopts high quality components, for long service life and low malfunction.
5. A compact electric controller is equipped for users to operate the decoiler easily.
6. It has an electronic sensor rod, for metal sheet contacting and automatic loop control.
7. It has a manual adjustable brake device. so can stop decoiling smoothly.
8. Its mandrel expanding adjusting is manual, but automatic expanding adjusting can be chose through a hydraulic cylinder for automatic operation.
9. A pneumatic holding down device can be equipped as optional, to press the coil and prevent the coil loosing.
10. An inverter can be equipped as optional in order to get and adjust variable decoiling speed easily.
11. A coil car is optional, for loading heavy coils to the decoiler mandrel easily.
12. Other optional devices and special requirements can be manufactured for you.
II. Specification parameter
| Model | MT-200 | MT-300 | MT-400 | MT-500 | MT-600 | MT-700 | MT-800 | MT-900 | MT-1000 |
| Metal sheet coil width | 200mm | 300mm | 400mm | 500mm | 600mm | 700mm | 800mm | 900mm | 1000mm |
| Metal sheet thickness | 0.1-3.2mm | ||||||||
| Coil weight KGS | 500 | 800 | 1200 | 1500 | 2000 | 3000 | 3000 | 4000 | 5000 |
| Coil inside diameter | 450-530mm | ||||||||
| Coil outside diameter | 1200mm | ||||||||
| Decoiling speed | 15m/min | ||||||||
| Electrical power | 380V, 3 phase, 50HZ (or other) | ||||||||
| Motor power | 0.5HP | 1HP | 2HP | 3HP | 5HP | ||||
| Net weight KGS | 550 | 750 | 800 | 900 | 950 | 1000 | 1500 | 1750 | 2000 |
| Machine size (m) | 1.0×0.8×1.1 | 1.1×1.0×1.2 | 1.2×1.1×1.3 | 1.4×1.2×1.3 | 1.5×1.2×1.3 | 1.7×1.3×1.4 | 1.8×1.4×1.4 | 1.9×1.4×1.5 | 2.0×1.5×1.6 |
| Mandrel expanding | manual (hydraulic expanding is optional) | ||||||||
| Coil holding down device | optional (pneumatic) | ||||||||
| Inverter for adjusting speed | optional (Delta) | ||||||||
| Coil car for loading coils | optional | ||||||||
