I. Main features
1. These FU series decoilers are very suitable and safe to decoil narrow metal sheet coils automatically.
2. Each decoiler has a horizontal pallet type loading device with low gravity center, so can load several narrow coils at one time.
3. It suits for high speed press machines very well, for producing metal eyelets, prong snap buttons, electric terminals, connectors etc.
4. It has an electronic contact sensor for automatic loop control.
5. A Delta brand inverter is equipped for variable speed adjusting control.
6. Other optional devices and special requirement can be manufactured for you.
II. Specification
| Model | FU-500 | FU-800 | FU-1000 | FU-2000 |
| Metal sheet coil width max. | 150mm | 150mm | 150mm | 150mm |
| Metal sheet thickness | 0.1-1.0mm | 0.1-1.0mm | 0.1-1.0mm | 0.1-1.0mm |
| Coil outside diameter max. | 1000mm | 1000mm | 1000mm | 1200mm |
| Metal sheet coil weight max. | 500KGS | 800KGS | 1000KGS | 2000KGS |
| Loaded coils height | maximum 600mm | |||
| Electrical power | 220V, 1 phase, 50HZ (or other) | |||
| Motor power | 200W | 400W | 750W | 750W |
| Decoiling speed | 24 meters per minute | |||
| Inverter for adjusting speed | optional (Delta brand) | |||
